Laser surface patterning to enhance adhesion of plasma sprayed coatings

In thermal spraying, adhesive bond strength is a feature of surface properties. An adapted surface is studied with prior-surface treatments to enhance interface energy. This study deals with Ni-Al coatings on 2017 aluminum alloy substrate produced by atmospheric plasma spraying. The adherence was evaluated with several controlled surface topographies obtained by grit-blasting and laser surface texturing technique. Adherence has been tested with two different techniques: pull-off test and LASer Adhesion Test. They induce different stresses at the interface. The results showed that the adhesive strength is mostly controlled by a contact adhesion area. A large contact area increases the energy release rate at the interface during coating failures. The bond strength tendency for the two adherence tests is similar: apparent adherence is tripled thanks to laser surface patterning. Fracture propagation is stopped nearby laser-induced holes due to the complex shape and has to deviate inside the coating to maintain crack propagation (inter-splat cracks). The energy at the interfaces being stored locally due to pattern: pattern morphology, pattern localization and powder feed rate are important factors that control the adhesion strength of the thermally sprayed coatings. (C) 2015 Elsevier B.V. All rights reserved.