Two-Dimensional Exact Subdomain Technique of Switched Reluctance Machines with Sinusoidal Current Excitation

Affiliation auteurs!!!! Error affiliation !!!!
TitreTwo-Dimensional Exact Subdomain Technique of Switched Reluctance Machines with Sinusoidal Current Excitation
Type de publicationJournal Article
Year of Publication2018
AuteursBen Yahia M, Boughrara K, Dubas F, Roubache L, Ibtiouen R
JournalMATHEMATICAL AND COMPUTATIONAL APPLICATIONS
Volume23
Pagination59
Date PublishedDEC
Type of ArticleArticle
ISSN1300-686X
Mots-clés2D, electromagnetic performances, finite iron relative permeability, numerical, sinusoidal current excitation, subdomain technique, Switched reluctance machine
Résumé

This paper presents a two-dimensional (2D) exact subdomain technique in polar coordinates considering the iron relative permeability in 6/4 switched reluctance machines (SRM) supplied by sinusoidal waveform of current (aka, variable flux reluctance machines). In non-periodic regions (e.g., rotor and/or stator slots/teeth), magnetostatic Maxwell's equations are solved considering non-homogeneous Neumann boundary conditions (BCs). The general solutions of magnetic vector potential in all subdomains are obtained by applying the interface conditions (ICs) in both directions (i.e., r- and theta-edges ICs). The global saturation effect is taken into account, with a constant magnetic permeability corresponding to the linear zone of the nonlinear B(H) curve. In this investigation, the magnetic flux density distribution inside the electrical machine, the static/dynamic electromagnetic torques, the magnetic flux linkage, the self-/mutual inductances, the magnetic pressures, and the unbalanced magnetic forces (UMFs) have been calculated for 6/4 SRM with two various non-overlapping (or concentrated) windings. One of the case studies is a M1 with a non-overlapping all teeth wound winding (double-layer winding with left and right layer) and the other is a M2 with a non-overlapping alternate teeth wound winding (single-layer winding). It is important to note that the developed semi-analytical model based on the 2D exact subdomain technique is also valid for any number of slot/pole combinations and for non-overlapping teeth wound windings with a single/double layer. Finally, the semi-analytical results have been performed for different values of iron core relative permeability (viz., 100 and 800), and compared with those obtained by the 2D finite-element method (FEM). The comparisons with FEM show good results for the proposed approach.

DOI10.3390/mca23040059