Mechanical simulation of a Proton Exchange Membrane Fuel Cell stack using representative elementary volumes of stamped metallic bipolar plates

The control of the performance of a fuel cell needs the knowledge of mechanical stresses. A finite element model submitted to operational static loads is developed for pure mechanical analysis of a stack. Adapted to practical implementation in the frame of industrial projects, the tool runs on work stations. Modelling and simulations at the early stage of the stack architecture development are mandatory to lower the costs of the stack and to contribute in designing component dimensions and forms, particularly of stamped metallic bipolar plates or clamping systems. The model should also be useful for accurate local analyses and channel geometry of metallic bipolar plates must be modelled in detail. But the number of degrees of freedom is huge and some model simplification is required to compute a whole stack. The homogenisation technique was applied, replacing cell parts with cpmposite finite elements or homogenised representative elementary volumes. This method is explained considering a single cell. Then a fuel cell stack model is built and finally computed using homogenised properties. The distribution of stresses computed at stack level can be applied as boundary conditions on detailed models to analyse local phenomena. Copyright (C) 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.